19. Components » Sensor Cluster

Sensor Cluster aggregates the traffic statistics collected by Packet Sensors and Flow Sensors into a single anomaly detection domain and/or IP graphing domain. It is usually used to create a single logical interface from two or more router interfaces monitored by Flow Sensor, or to group up several Packet Sensors that listen to bonded interfaces or to different NIC queues.

To add a Sensor Cluster, click the [+] button found on the title bar of the Configuration » Components panel. To configure an existing Sensor Cluster, go to Configuration » Components, and click its name.

SENSOR_CLUSTER_CONFIGURATION8.01_png

Sensor Cluster Configuration parameters:

Sensor Name – A short name to help you identify the Sensor Cluster
Server Color – Color used in graphs for the Sensor Cluster. The default color is a random one. You can change it by clicking the drop-down menu
Reports Visibility – Toggles the listing inside the Reports » Devices panel
Device Group – Enter a description if you wish to organize components (e.g. by location, characteristics) or to permit fine-grained access for roles
Sensor Server – Select a server that fulfills the minimum system requirements for running the Sensor Cluster
Link Speed IN / OUT – Summed-up speeds (bandwidth, capacity) of the aggregated interfaces. These values can be used for percentage-based reports and percentage-based bits/s thresholds
Associated Sensors – Select which Packet Sensors or Flow Sensor interfaces are aggregated by the Sensor Cluster
IP Zone – Sensor Cluster has to extract from the IP Zone the network’s boundaries and per-subnet settings
IP Graphing – Sensor Cluster can generate IP graphs for the summed up traffic data
Aggregated – Enables IP graphing in the Sensor Cluster and disables IP graphing in the associated Sensors
Not Aggregated – Enables IP graphing in each associated Sensor and disables IP graphing in the Sensor Cluster
Anomaly Detection – Sensor Cluster can detect anomalies in the summed up traffic data
Aggregated – Enables anomaly detection in the Sensor Cluster and disables anomaly detection in the associated Sensors. To be able to see anomaly graphs, also set IP Graphing to Aggregated
Not Aggregated – Enables anomaly detection in each associated Sensor and disables anomaly detection in the Sensor Cluster
Duplicated – Enables anomaly detection in the Sensor Cluster; also enables anomaly detection in the associated Sensors
Comments – Comments about the Sensor Cluster can be saved here. These observations are not visible elsewhere
To start the Sensor Cluster, click the small on/off button displayed next to its name in the Configuration » Components panel. Make sure that the Sensor Cluster starts correctly by watching the event log and the traffic values from Reports » Devices » Overview.